Family Safety Products Safety Siren Pro Series3 Radon Gas Detector
Safety Siren Pro Series iii Pro Radon Gas Detector HS71512 User Guide
Radon Gas – Facts and Concerns
Radon is a radioactive gas that is colourless, tasteless, and odourless. It is incommunicable to observe Radon without the use of sensitive test equipment. Radon is a naturally occurring gas that is produced by the breakup of uranium in soil, water, and/or rock. If allowed to accrue at high levels for the long term, it can be hazardous to health. Radon is the second leading cause of lung cancer while cigarette smoking is the principal crusade and leads to more lung cancer deaths.
The EPA (Environmental Protection Agency) suggests that corrective action can be taken to reduce the radon levels in your dwelling house if it'southward measured over the long term at 4pCi/L or greater.
You can also visit the EPA website at world wide web.epa.gov/iaq/radon/index.html for more than information.
-
Placement of Radon Detector
The Condom Siren Pro Series3 Radon Detector should be positioned in the everyman living area of your domicile in a location where information technology will be kept undisturbed. The audible alarm should be able to exist heard from those areas. A 2nd detector tin also be placed in a basement room that is rarely used. This is as well a good means to determine the levels of radon in your home.
The location of the detector should be:
- At least 3 feet from doors, windows, or any other possible openings on the exterior walls
- At to the lowest degree 1 foot from the outside wall
- At least 20 inches from the flooring
No other obstructing objects should be placed within 4 inches of the detector.
-
Installation of the Detector
The Rubber Siren Pro Series3 Radon Detector is well designed to plug into a standard 120–volt household outlet using the provided and attached power cord. The detector should be placed face-upward on a tabletop or whatever other apartment surface where the ventilation slots won't exist blocked. Recollect to keep the detector dust gratuitous. A proper airflow must be maintained through the detector so as to obtain an air sample representing the local environment.
-
Areas to exist Avoided
- Near drafts acquired past heating, ventilating systems, and/or ac vents, doors, fans, and/or windows
- Near excessive estrus areas, such as fireplaces, nether direct sunlight, and areas of high humidity
- Near radios, computers, televisions, or other electrical equipment
- Most curtains, piece of furniture, or whatsoever other items that may restrain the flow of air
- The detector should besides not be placed in kitchens, laundry rooms, closets, or bathrooms
-
Display Features
The Safety Siren Pro Series iii Radon Detector's display is designed to notify the user about the radon gas levels on either a curt–term or long–term ground and is updated every 60 minutes if there is a change in the levels. Both long-term and short-term measurements are run simultaneously and can exist accessed past the utilize of the bill of fare button. The numeric LED brandish of the detector shows the levels of radon gas in Pico Curies per liter i.eastward. pCi/50 (the display range is betwixt 0.0 and 999.nine).
-
Short-Term Display
The display for curt-term reading is an average of radon gas levels over the past seven days. Short-term readings allow the user to monitor any fluctuations in the home environs providing seasonal and atmospheric condition-related variations likewise. A light-green LED next to the letter of the alphabet "S" indicates this brusk-term reading. If the measurement reaches 4pCi/50 or more, with the exposure of 30 sequent days or more than, the audible alarm will ring.
-
Long-Term Brandish
The display of the long-term reading is an average of the radon gas levels for the length of fourth dimension that the detector has been powered on or has been the last reset. A dark-green LED next to the letter of the alphabet "L" indicates the long-term reading. When the reading on the long-term reaches a level of four or greater an audible warning will sound immediately.
-
Initial Start-Upwards
Upon the initial ability-up, the detector's display will temporarily testify an internal code including a few letters and numbers. This code determines if the detector is calibrated for utilise within the United states or Europe. The detector will comport a self–test and the aural alarm will chirp iv times. The brandish volition and so read "–" i.e. two dashes. These 2 dashes volition remain until a sufficient sample has been obtained by the detector to create a precise reading. For brusque–term and long–term readings, samples demand to be taken for at least 2 days (48 hours) earlier an accurate reading is displayed.
-
Aural Alert
4pCi/Fifty is the standard level set by the EPA equally the threshold at which cosmetic action should brainstorm to eliminate the radon problem within your home. The detector volition alert in both long–term and short–term modes when:
- Short-term readings display 4pCi/Fifty or more than for 30 consecutive days or
- Long-term readings display 4pCi/L or greater (alarms immediately, no 30 days delay).
When the detector goes into alarm mode, the cablegram will sound iv chirps. This alarm will exist repeated later every hour until the radon level on the long-term reading drops below 4pCi/L or until the user mutes the alarm.
-
Menu Push Operation
The card push manages iv different functions for the Safety Siren Pro Series 3 radon detector. These functions are controlled by the length of time that the button is pushed.
-
Long-Term / Short-Term Button
This office is used to alter the display between the short–term and long–term radon level readings. Press the carte button for i second. The display changes instantly with the release of the menu button. The LED indicator light next to the "S" or "L" points out which reading is being viewed. If the bill of fare push button is held in for longer than 3 seconds, the brandish doesn't alter.
-
Test
The examination role is used to appraise the audible alarm. Press and hold the menu push button for five seconds. The alarm will band 4 chirps as if information technology is in an alarm condition. Release the menu push button once the alert begins to ring.
-
Alert Mute On/Off
This function allows yous to silence the aural alarm. While in an alarm status, press and concur the menu push for 15 seconds. As you surpass the test phase, the alarm volition ring iv chirps. The display will then read "Off". Release the menu button immediately and the display returns to normal condition. If the long-term reading returns to a controlled level, the audible alarm volition exist reset to the on position. If desired, the alarm can be reactivated by repeating the same process. On reactivation of the alarm, the brandish volition read "Aon".
-
Reset/Clear Memory
This office allows you to articulate and/or reset the retentivity for both curt–term and long–term readings. This is a mandatory footstep whenever the detector is moved to a unlike location. Press and hold the menu button for 20 seconds. The display will read "CL". Upon the release of the carte du jour button, the "CL" keeps flickering until the memory has been completely cleared. One time the retentivity has been cleared, the display volition read "—" for 48 hours until enough sample has been obtained to provide an verbal reading.
-
Calibration
Annotation for Radon Measurement Professionals
The U.S. Environmental Protection Bureau (EPA), Radiations and Indoor Environments National Laboratory (R&IE) accept approved this device for radon gas level measurement. If you are a licensed radon measurement professional using this device for home inspections, etc., the EPA recommends a calibration and background bank check be performed annually.
Contact Family Prophylactic Products Inc. to request a Calibration Say-so Number (CA#) as the units without CA# volition be returned to the sender (freight prepaid). The fee for calibration is $75. The time taken is approximately two weeks.
Annotation for Home Owners
Annual calibration is optional for any private utilise of this detector. A homeowner who wants to request a periodic calibration must also follow the same procedure. Some charges may apply.
Fault Messages
Every 24 hours, this radon gas detector will do a cocky–test. If there is a failure in this self–test, an mistake message volition announced on the display.
-
Err3 – Noise Error
This mistake is normally from whatever kind of electrical racket interference. This fault tin can be caused past fluorescent lights, computers, televisions, or other electrical items. The detector needs to exist moved to a dissimilar location which is away from the items causing the interference.
- Err4 – Sensor Error
This error occurs on sensor failure to cocky-test. If this error appears, the detector should be unplugged for but 5 minutes and powered dorsum up. You lot can besides get your detector replaced if the Err4 code reappears.
Specifications
| Power Source Adapter | 120Vac, 60Hz, half dozen.5 Due west Model No. DCU180020 |
| Input for the Detector | 18VDC, 200mA |
| Sensor | Ionization Chamber |
| Sensor Voltage | 250VDC |
| Full-Scale Reading | 0.0 to 999.9pCi/Fifty |
| Operating Environment | 0 C (32 F) to twoscore C (104 F) |
| Storage Environs | -xx C (-4 F) to 85 C (185 F) |
| Aural Alarm | 85dB at 10cm The alert beeps every hour in instance the long-term readings are four pCi/Fifty or moreThe warning beeps in instance the short-term readings are 4 pCi/Fifty or more than for 30 sequent days The alarm tin can exist muted anytime by the user |
| Averaging Frequency | Levels will be updated on the detector'south display every hour |
| Short-Term | The average is taken over the past 7 days |
| Long-Term | Average from the time of the last reset. The maximum sampling time is of v years. The detector will automatically reset after 5 years of accumulated data. |
| Accuracy | +/- 20% pCi/L |
| Dimensions | four.vii" x 3.1" x 2.1" |
One Year Express Period Warranty
Family Safety Products, Inc. warranties this production to the original retail purchaser, to be complimentary from any kind of defects in cloth and workmanship. This isn't a transferable warranty and is constructive from the engagement of the original retail purchaser just.
Whatsoever defective units that are returned to Family Safety Products, Inc. inside the warranty period will be repaired or replaced gratis of charge to the original purchaser. If you lot suspect that your detector is defective, please follow the instructions found beneath.
Procedures for Warranty Service:
- Y'all can contact Family Safety Products, Inc. by email at [email protected] or past postal mail to receive a return authority (RA) number. (Whatsoever products returned without the RA number will be refused and returned to the purchaser).
- Make certain to include with your detector the RA number, your name, address, phone number, and clarification of the effect you are experiencing. (All returns must include a copy of the original buy receipt too).
- While packing the detector, ensure that no harm occurs during return shipment.
- Write the RA number received carefully on the outside of the packet near the address label.
- Send the package (postage prepaid)
To,
Family unit Prophylactic Products, Inc.
2879 Remico St. SW,
Grandville, MI 49418.
This Warranty Does Not Cover:
- Toll of shipping the product
- Normal wears & tears, scratches, or fading of the product
- Impairment acquired by misuse or tampering with the product
- Damaging or removal of the back encompass
- Damage acquired by failure to follow the installation
- Consequential or incidental damages or expenses
This limited menses warranty is restricted to the provisions conspicuously stated above. Implied warranties, warranties of merchantability, and/or warranties of fitness for a item use are excluded. If whatever of this warranty is prohibited by federal, state, or local law, that provision shall not be applicable.
Source: https://radongasdetectorreviews.com/safety-siren-pro-series-3-radon-gas-detector-hs71512-user-guide/
0 Response to "Family Safety Products Safety Siren Pro Series3 Radon Gas Detector"
Post a Comment